Skip to main content

Enter a Known Anaerobic Threshold in a PPD Test

A known anaerobic threshold can be entered manually when setting up or analyzing a PPD test. Use the feature carefully if the value is estimated rather than measured.

Recommended PPD protocol

The recommended protocol consists of two 20-second sprints and two maximal efforts lasting between 3 and 8 minutes each.

Enter the anaerobic threshold

1. Open an existing PPD test or create a PPD test for running or cycling.

2. Add the recorded 20-second sprints and the longer all-out efforts.

3. Select Manual Entry and enter the value for Anaerobic Threshold.

4. If a range or tolerance field is available, enter a range that accurately reflects your confidence in the threshold value.

5. Run the PPD analysis and review the results before accepting the test.

Important: Accuracy of estimated thresholds

An estimated threshold that is inaccurate by around 10% can negatively affect the test results.

Prefer a threshold that is accurately known from diagnostic testing. If you must use an estimate, specify an appropriately broad uncertainty range rather than treating it as an exact measurement.

Did this answer your question?